16 files | 2.0 MB | 1749 views

Model "Trailer Tr3 MkII Black” is build with LEGO® in scale 1:17,5 and motorized using LEGO® Power Functions. It is not build after a specific brand or type of trailer. This build represents a three axle log trailer with liftable third axle.

The trailer features: solid axle suspension on all axles, one set of lights, kingpin, remotely controlled landing gear and parking break, remotely controlled liftable third axle that simultaneously extends or retracts the rear impact guard and this model has many details.

This newly designed and engineered trailer utilizes the same suspension as US Truck T1 MkII which uses LEGO® rubber belts and LEGO® rubber axle connectors.

This model is another custom design by Ingmar Spijkhoven AKA 2LegoOrNot2Lego that comes with building instructions and inventory/parts list!
You can build it yourself! To do so you can buy the Building Instructions. Early in the building process you will see what it is that you are building. You will be very excited from the moment you start the build of "Trailer Tr3 MkII Black" till you finish it with a total number of parts of about 1000 pieces.

Simultaneously with lifting the third axle the rear impact guard is retracted. So with the third axle down the rear impact guard is fully extended, this to increase safety when hauling loads. Unloaded the total length of the combination is reduced with the third axle lifted and the rear impact guard in.

As with most log trailers this model has so called bolsters or bunks. Those are the U shaped frames on top of the trailers chassis. Bolsters are obviously necessary to keep the logs in place. Even though the bolsters on this specific model are fixed they can easily be re-located if wanted. The number of six can also be altered to your own needs. Give this trailer the setup you want it to have.

PICT00.jpg
PICT01.JPG
PICT02.JPG
PICT03.JPG
PICT04.JPG
PICT05.JPG
PICT06.JPG
PICT07.JPG
PICT08.JPG
PICT09.jpg
PICT10.JPG
PICT11.JPG
PICT12.JPG
PICT13.JPG
PICT14.JPG
PICT15.JPG