14 files | 97.1 MB | 5640 views

These are my compiled MODs for pimping up my 42056 Porsche 911 GT3 RS. 
- Includes free 315 pages PDF with step-by-step building instructions.
- You will need 285 additional parts to the original set 42056-1.  Use rebrickable's compare feature to see which parts you need.

Now improved with new front and rear axles with anti-roll bar (see change log)!

v1.0 (2017-05-04)
I started with adding all changes from Didumos Unofficial Errata
- This compilation contains some really cool changes and optimizations from the Lego community.

Then I added an easy to removable body from HispaBrick magazine

I took some ideas from Didumos69 Ultimately playable Porsche
- Ackerman steering allowing smaller curve radius
- Additional shock absorber and improved ground clearance for front axle => Very good idea for playability!
- Adding some stiffness to chassis for driving without body

Finally I optimized these features by my own:
- Adding "Hand-of-God" (HOG) steering easy accessible from the dash board
- Limited end positions at steering rack sliders
- Small optimizations for quick and easy remove of the body (dashboard included to body; better fixture of windscreen and seats) 
- Some small color changes underneath the body, but keeping alle the original shape and color from the outside
- Adding all my MODs to 3D model with MLCad starting from LDraw's Official Model Repository (OMR)
- Create full PDF building instructions with LPub3D
- Publish on Rebrickable.com

v1.1 (2017-06-10)
Added these improvements:
- remove pin clutch as suggested by Kumbbl
- Mount seats to body as suggested by DayWalker
- adjust front calipers as suggested by DayWalker

v1.2 (2017-07-08)
Added these improvements:
- gear box indicator, showing you which gear is selected as sugessted by DayWalker and Kumbbl
- working doorlocks based on the design of el Squatter and optimized by myself. 
- reinforced HOG steering

v1.2.1 (2018-04-06)
Bugfixes:
- Added missing part "axle pin long" (11214) on page 139
- Added missing part "pin long" (6558) on page 181

v1.3 (2018-04-28)
- Improved paddle shifter (smooth, easy and compact design)
- Thank to Didumos who inspired me with his Improved PDK shifter. He used blue 1/2 pins to guide the yellow knob gears in exactly the right position for a smooth movement during shifting. This is much better than the original design.
- I combined Didumos' geometry while keeping most of the original design and the easy to mount rubber bands on top. 

v1.4 (2019-01-25)
- Improved front and rear axles with anti-roll bar based on the design of DayWalker (works and looks really cool!).
- And with this new front axle HOG steering is smoother (simpler design, less friction and geared down a bit)

Have fun to pimp up your Porsche, if you like!

History
history
0 files
42056-1 - Porsche 911 GT3 RS-42056 - bodyframe1.png
42056-1 - Porsche 911 GT3 RS-42056 - bodyframe2.png
42056-1 - Porsche 911 GT3 RS-42056 - gearshift1.png
42056-1 - Porsche 911 GT3 RS - chassis.png
42056-1 - Porsche 911 GT3 RS - door.png
42056-1 - Porsche 911 GT3 RS - frontaxle.png
42056-1 - Porsche 911 GT3 RS - gear ind1.png
42056-1 - Porsche 911 GT3 RS -gear rack limiter.png
42056-1 - Porsche 911 GT3 RS - HOG steering.png
42056-1 - Porsche 911 GT3 RS.mpd
42056-1 - Porsche 911 GT3 RS.pdf
42056-1 - Porsche 911 GT3 RS.png
42056-1 - Porsche 911 GT3 RS - rearaxle.png
42056-1 - Porsche 911 GT3 RS - underside.png