17 files | 33.2 MB | 243 views

2in1 - pullback or manual drive and steering V6 drag car made from 42106's parts.
Steering can be un/locked and the pullback bypassed with an axle swap.
Engine details can be added or removed as you wish - carb, supercharger and exhaust pipes.

Instructions are here -> https://rebrickable.com/mocs/MOC-56255

Making the V6 was challenging as this set lacks some of the mounting pieces used in the 42093 and 42098. The mechanics below the chassis can be seen below.

Features:
- Moving V6 engine
- Pullback motor connected to the V6
- Steering via HoG
- Steer lock via single pin
- Slammed stance and big exhausts
- Detailed interior - seat, steering wheel, gear shifter
- Sharktails
- Option to convert it to manual driving using two axles /listed in the instructions and in video/


Rear tires are stacked one over the other to give a more drag-rubber look.
If you're not comfortable with this you can just use the white rims that come with the set.

You can see the 42098B's drag car inspiration in this car. Both got only two wheel arches.
Credit to the original design goes to TLG for making the red car in the first place. You can see real-life comparison photos in the gallery above.

Instructions come in premium PDF form made in STUD.IO software.

42106C-V6-drag-car-01.jpg
42106C-V6-drag-car-02.png
42106C-V6-drag-car-03.jpg
42106C-V6-drag-car-04.jpg
42106C-V6-drag-car-05.jpg
42106C-V6-drag-car-06.jpg
42106C-V6-drag-car-07.jpg
42106C-V6-drag-car-Drivetrain.png
42106C-V6-drag-car-manual-mode.png
42106C-V6-drag-car-Pullback-mode.png
42106E-V6-Drag-Car-Thumb.jpg
landing-drag-car.jpg
landing-page.jpg
Sample-page.png
spare-parts.png
z42106-Taildragger-v45.gif